News

Launch had been joining in Automechanika Shanghai in successive 14 years

Date: 2018-12-10
Clicks: 66

As a leader in the automotive industry, LAUNCH was honored to bring numerous new brand diagnostic products in the show. The Automechanika Shanghai 2018 was held ranging from 28th, November to 1st, December.

 

Launch had been joining in Automechanika Shanghai in successive 14 years


The Automechanika Shanghai is important industry party for all exhibitors, which also presented the latest technology and trends. Launch, one of the earlier members entering the automotive industry, integrating the innovation and tradition. Its exhibition booth(#5.1F87) was showcased the innovative products, such as X-931 Wheel Aligner, X-431 PAD III V2.0, X-431 ADAS Calibration Tool, Tire Changer and Balancer. Besides, Launch also shows the tradition popular products like X-431 series, CAT series, Creader series and Lifts. Launch brand is growing more and more famous with the aid of injecting the new products to the industry. In some degree, the development of Launch fully demonstrates the latest level of industry technology.

 

Launch had been joining in Automechanika Shanghai in successive 14 years

 

New Arrival catches the attention of visitors

The non-contact wheel aligner was the most attractive one. Instead of the wheel clamp of the 3D wheel aligner, X-931 was equipped with the four laser measuring units to measure the wheel positioning data so as to avoid damaging the wheel hub. In order to ensure the accuracy of the data, a computer installed with 3D four-wheel positioning software and based on line laser projection, making four-wheel positioning more effective and intelligent.

 

Launch had been joining in Automechanika Shanghai in successive 14 years

 

Launch the most popular products was showcased

Automotive diagnostic products were also attaining the attention of new and old customers, which is most possibly asked. X-431 PAD V and X-431 PAD III V2.0 support most of the diagnostic functions. At the same time, as more and more new energy vehicles are available, their fault diagnosis has become a focus of increasing concern in the auto repair industry. It is a matter of pride that Launch's powerful diagnostic software is also applicable to new energy vehicles as the same diagnostic function as the traditional fuel car.

Launch had been joining in Automechanika Shanghai in successive 14 years

 

The Advanced Driver Assist System Calibrate Tool was debut

X-431 ADAS Calibration Tool was presented in the exhibition for the first time, which attracted lots of customers to the Launch booth. X-431 ADAS is designed to calibrate the camera- and radar-based sensor of the vehicle after the sensors have been removed, replaced and repaired. Support calibration systems like Adaptive Cruise Control, Lane Departure Warning, Night Vision System, Blind Spot Detection, and Around View Monitor.

Launch had been joining in Automechanika Shanghai in successive 14 years

 

Live demonstration is a good way to show

In order to let the honored guest experience the product, Launch has designed the live product demonstration. One of the visitors, Mr. Zheng, was eager to try out. He used computer to click the software, and then the measurement unit of the four-wheel locator automatically measured. The diagnosis results were quickly displayed on the computer screen.

Launch had been joining in Automechanika Shanghai in successive 14 years

 

In addition to the four-wheel positioning device, the visitors also tested the automobile diagnosis equipment, through the X-431 series to the intelligent diagnosis function, automatic identification of vehicle information and rapid diagnosis, process time-consuming short diagnosis accurate. Efficient, intelligent and fast diagnostic experience was highly recognized and praised by the guests.

 

Launch was interviewed by the Messe Frankfurt organizer

Launch was in the original list of exhibitors since the first automechanika Shanghai was held in 2005. Alan Xu, the International Market Centre Director, shared the profound business relationship between Launch and Messe Frankfurt. The development of each other was witnessed by millions of visitors.

 

Launch had been joining in Automechanika Shanghai in successive 14 years

 

The Automechanika Shanghai 2018 was completed successfully in 1st, December. We are so glad to show the customers around the world with the latest products and take the advantage of promoting our products to a wider level. Launch will continue to focus on exploring more innovative products and share it with Automechanika Shanghai. See you in 2019!


Relevant Content
  • Hot
  • New
  • Media
The hot summer come with quiet, the weather of Shenzhen is sometimes bright and sunny, sometimes bursts of rain, changes like a child. 2019 has passed half of the year, looking back what we have achie...
2019 - 06 - 21
In the early summer, it is not hot enough but the fire of enthusiasm from Launch had already ignited in the Latin American. Hundreds of customers from 17 countries were reunited in Panama City to join...
2019 - 06 - 11
Through over 27 years of development, with the joint efforts of all distributors, LAUNCH is constantly expanding the territory of its overseas market. As an important event, the annual distributor mee...
2019 - 06 - 06
Automec 2019 was held in Sao Paulo from 23 rd  to 27th April, which has exhibited 11 times successfully and one of the leading fairs of its kind in Latin America. Whereas hundreds of worldwide cu...
2019 - 05 - 17
The Statement of X931 distributorship in Japan
2019 - 05 - 14
Facebook Facebook Twitter Twitter
Focus on
Copyright ©2017 LAUNCH TECH CO.,LTD
犀牛云提供企业云服务