X-431 IMMO PLUS
Features:
Strong core, large memory, super battery life
It integrates professional anti-theft matching, anti-theft programming, full-model system-wide diagnosis of plus functions and special functions. One machine with multiple functions and high performance cost ratio.
All-round anti-theft matching, fast and accurate reading of anti-theft data
Covering the anti-theft matching function of many models in Asia, Europe, and America, more brands continue to be launched, up to 60+ brands
Support the full-model system-wide diagnosis of plus functions (read version information, read DTCs, clear DTCs, read data streams) for global 110+ brands
Support 39 special functions such as service lamp reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset
Support the VIN intelligent identification function to quickly enter diagnosis
Fast and accurate diagnosis
Supports key matching/copying, anti-theft IC reading & writing, and ECU reading & writing, etc.
Anti-theft modules replacement: Support anti-theft modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
Anti-theft password reading: Supports the anti-theft password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
Key Matching:Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc.
Advantages
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
- Bosch engine ECU: ME17，MED17，EDC17，MEVD17, etc.
- Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
- Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
X-431 IMMO PLUS Host Specifications
Name | Parameter |
Processor | 2.0GHz 4-core |
Operating system | Android 10.0 |
Memory | 4GB |
Storage | 64GB |
Battery | 47880mWh(7.6V,6300mAh) |
Display | 8-inch, 1280*800 |
Camera | Rear 8MP |
WIFI | 2.4GHz/5GHz (dual frequency) |
Interface | TYPE A *1 &TYPE C*1 |
Operating temperature | 0~50℃ |
Size | 234*166*39.5(mm) |
X-PROG 3 Anti-theft Matching Tool Specifications
Name | Description |
Vehicle key slot | Used to place the vehicle key to perform key matching function |
DB26 | Used to connect anti-theft cables, such as the data acquisition cable of 4th generation instrument keys all lost, etc. |
Infrared slot for Benz key | Used to place the Mercedes-Benz infrared key to perform the key matching function |
Vehicle key chip hole | Used to place the key chip to perform the key matching function |
Status indicator | Power supply indicator lamp |
DIY slot | Used to connect the anti-theft ECU pin through the cable to read and write data |
Locker | Install the chip burn-in socket to complete the EEPROM or MCU data reading and writing operations |
DC12V power supply | Connect DC12 power supply |
DB15 | Connect the main harness |
DBScar VII VCI Connector Specifications
Item | Parameter |
Operating voltage | DC 9~18V |
Communication method | Bluetooth |
Operating temperature | -10~50℃ |
Size | 118.3*69.5* 32 (mm) |
Power indicator | When the VCI diagnostic connector is connected to vehicle OBD II diagnostic socket, the indicator lamp will turn red. |
Vehicle indicator | The indicator lamp flashes in green when the VCI diagnostic connector is communicat-ing with vehicle ECU. |
IO indicator | 1. When the VCI diagnostic connector communicates with the diagnostic host via Blue-tooth, the indicator lamp is blue, and flashes in blue during communication. 2. When the VCI diagnostic connector communicates with the diagnostic host via USB, the indicator lamp is red and flashes in red during communication. |
